wearelikewise shift knobs for i30N?

[R Veloster N]

I'd like to have this shifter;
https://cae-racing.de/CAE-Ultra-Shifter_2632

I'll cut the dang console too! How about it @NULLOBANDITO, Christmas is nearly here!

 

[R Veloster N]

You talking about this one?

 

[NULLOBANDITO]

Asked my dealer about that already, they currently don't even have the part number, and also told me that Hyundai will probably ask for a VIN before giving anyone a spare/replacement.

 

[NULLOBANDITO]

@R Veloster N thought about it, but I currently want to do mods that are removable without ruining too much in the process.

 

[red dutch]

I think they are the same, there is just a little square on the bottom of the nob with a engraved N in it.

 

[R Veloster N]

@R Veloster N thought about it, but I currently want to do mods that are removable without ruining too much in the process.

No no, you buy it for me for Christmas. I will reciprocate with let's say, a Forge or Wagner intercooler!

 

[R Veloster N]

Not available yet, it's on the Hyundai N Accessory list. However, for a small fee of 45K you to can have one included, with the purchase of a C-Project Car.

 

[red dutch]

ott available yet, it's on the Hyundai N Accessory list. However, for a small fee of 45K you to can have one included, with the purchase of a C-Project Car.

no thanks, i'm happy with the red one..

 

[R Veloster N]

Though you might say that!!

I would also!!

 

[NULLOBANDITO]

Okay, so everything arrived today and it's installed now! Booyah!



So the 12mm Euro Adapter fits the N, however due to how far you have to screw the shifter on and how high the N's reverse lockout moves up you can't mount the shifter and have a reverse gear. Solution:



Now what you'll have to do is put the car in reverse and make sure there's still a bit of space left between the bottom of the 12mm Euro Adapter and thr top of the "shortened" (read: sawed off) reverse lockout.

Then tighten everything down and make sure it fits your shifting position comfortably and you should have something that looks a little like this:


1st and 6th gear:

 

[iiNNEX]

I think you need a longer shifter!

Good work though, well written out.

 

[R Veloster N]

There's no missing it I can guarantee that. That's the beauty of what he's installed. It can be lowered or raised up to suit. How does it feel with the Shift Kit @NULLOBANDITO?

Just a suggestion, use a polishing wheel and finish off the cut area, then either paint black or polish the entire reverse lockout unit and clearcoat.

 

[NULLOBANDITO]

Feels quite good, but I think I'll have to set the Short-Shifter mod to its tightest settings. Feel like I'm in a rowing boat with those shift distances

 

[R Veloster N]

LMAO! Gently down the stream then, @NULLOBANDITO . I'll let you know how the new Boomba and transmission & Shifter bushing work, when they arrive and I get them installed. I think it will tighten the gate up a bit.

 

[CF2000]

I know this is all about preference but to me that just looks ridiculous.

 

[NULLOBANDITO]

I know this is all about preference but to me that just looks ridiculous.

It absolutely is, but you can also get only the shifter knob. If I want to, i can just unscrew the extension and use the longer shift knob directly on the adapter.

 

[smoov]

I know this is all about preference but to me that just looks ridiculous.

 

[iiNNEX]

Could be worse

 

[Burke]

I think they are the same, there is just a little square on the bottom of the nob with a engraved N in it.

I am super keen to get this project C all metal gear knob. Do you have any further info on its availability? Any item numbers? Cheers

 

[R Veloster N]

Not available as of yet. It will be when the N-Accessories are released by Hyundai. Then you'll be able to order it thru your dealership parts department or online thru an Hyundai N-Accessory vendor.