MSD Coils arrived last night, now to the install and testing;
-
Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i30 N, Ioniq 5 N, i20 N, Veloster N and Kona N forums! Check out the i30 N Bible Here!
Some new body kit but I'm not exactly fond of either but here you go and you can decide for yourselves;
SC Garageworks a bit over the top;
Custom Hyundai Veloster 2019 Products - Sarona
Custom Body Kits designed, manufactured and distributed by Sarona Design
www.sarona.com
SC Garageworks a bit over the top;
That wing looks way too big! Don't think the wide angle shots are doing it any favors, either.
Any first impressions with these? Im thinking about getting these.
I figured out what it looks like; Star Wars Tie Fighter.Some new body kit but I'm not exactly fond of either but here you go and you can decide for yourselves;
Custom Hyundai Veloster 2019 Products - Sarona
Custom Body Kits designed, manufactured and distributed by Sarona Designwww.sarona.com
SC Garageworks a bit over the top;
Would love to hear the steps for install. I'm interested in getting this soonishUpgraded Hyundai HPFP on the way;
Will do, once I do the install and post the steps for others to see. It's a fairly simply process, like changing the Fuel Injectors.
drive.google.com
Fuel and Emissions – Google Drive
Last edited:
For those wondering, the pump comes from Hyundai Motorsport. It is an uprated Hyundai MOBIS based part as per TCR and WRC requirements.
Although the Hyundai part number is; 35320-TGA0 which is for the Santa Fe, Sonata, etc it's uprated by Hyundai Motorsport.
Although the Hyundai part number is; 35320-TGA0 which is for the Santa Fe, Sonata, etc it's uprated by Hyundai Motorsport.
Last edited by a moderator:
from where were you able to acquire one if I may ask? Did you get it from Hyundai Motorsport directly or through a third party?For those wondering, the pump comes from Hyundai Motorsport in Alzenau, Germany. It is an uprated Hyundai MOBIS based part as per TCR and WRC requirements.
Although the Hyundai part number is; 35320-TGA0 which is for the Santa Fe, Sonata, etc it's uprated by Hyundai Motorsport.
Third Party; SXTH Element Engineering;
sxthelement.com
$703.00 total with state tax and 3 day shipping.
2.0T High Pressure Fuel Pump Factory Upgrade
Increase the pressure for your fuel system with an upgraded fuel pump.
sxthelement.com
Got around to installing the Ultra Racing rear lateral subframe bar/brace. It was a very easy install and took less than 20 minutes. Nuts were torqued to 130 Ft Lbs.
Got the new knob! The old one was unbearably sharp to me, the new one is just right. Also, fits even tighter now with no wiggle or give! Left is the new design, right is the old (sharp) design.
Hey @R Veloster N. Do you know if Turbo Tech Racing will ever produce a racing intake manifold for the Veloster N?
No they haven't, there hasn't been enough interest from owners. It's all about dollars and numbers and I understand why they won't take on a project if there isn't enough interest.
It's the same with the TTR transmission mount. Those who are interested can help by directing other owners to the TTR thread to post their interest. The more that are commenting and putting their name behind it, the better chance of production.
It's the same with the TTR transmission mount. Those who are interested can help by directing other owners to the TTR thread to post their interest. The more that are commenting and putting their name behind it, the better chance of production.
Last edited:
This is what the finished Velossa Tech Ram Air looks like when the OEM air duct is utilized. I did this awhile back and never posted the finished result baring the black rubber trim.
I actually have some overlapping black rubber trim, that will completely seal around the cutout. The cuts smooth that almost look factory. With the rubber trim, it will look about as close to factory as can be. I'll post some more photos when it's on.
I'll post the lower modified unit when I'm completed. There's nothing special, just both side cut and formed to both sides of the Forge Motorsport FMIC in the location holes for the OEM lower air curtain.
The FMIC already has the lower duct work that matches the inside of the bumper facia. I have completely sealed the edge of the FMIC with the same overlapping rubber trim, which mates to the inside of the bumper facia and gives added internal support and precludes any vibration or rubbing.
It's not pictured here but I will include it in the next series of photos with the rubber trim added to the upper and lower air curtains.:
I actually have some overlapping black rubber trim, that will completely seal around the cutout. The cuts smooth that almost look factory. With the rubber trim, it will look about as close to factory as can be. I'll post some more photos when it's on.
I'll post the lower modified unit when I'm completed. There's nothing special, just both side cut and formed to both sides of the Forge Motorsport FMIC in the location holes for the OEM lower air curtain.
The FMIC already has the lower duct work that matches the inside of the bumper facia. I have completely sealed the edge of the FMIC with the same overlapping rubber trim, which mates to the inside of the bumper facia and gives added internal support and precludes any vibration or rubbing.
It's not pictured here but I will include it in the next series of photos with the rubber trim added to the upper and lower air curtains.:
2019-2021 Veloster N Carbon Fiber Front Door Sills Driver and Passenger Set - SoCal Garage Works
100% oem replacement carbon fiber Driver and Passenger door sills Comes as a pair of 2 4-6 weeks delivery time to manufacture 100% Oem fitment
scgarageworks.com
