• Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i30 N, Ioniq 5 N, i20 N, Veloster N and Kona N forums! Check out the i30 N Bible Here!

i30 N 2021 i30 N

Still haven’t got mine, I ordered it 29th July 2021.

So far I’ve been told October 2021, 14th December 2021 and 28th January 2022.…

I’m holding out hope it’s on the Isar Highway which is currently at sea from Gdańsk and is due to dock in Tilbury tomorrow, then two weeks until the dealer gets it. This is what I’ve worked out from general information I’ve been given from Hyundai U.K.
Ouch! When I went round a couple of dealers back in October they told me that no Fastbacks were coming to the UK before January - I suppose that is true but it's now February... Good luck!
 
  • Like
Reactions: NCart
Posted this is another thread but still relevant here i suppose; Capture.PNG

That's my non-fastback delivery schedule to the UK currently. Original order 21st October
 
I apologise in advance if these questions have already been asked/answered; I just wanted to ask if anyone knows if there were any improvements on these specific 'flaws' with the pre-facelift model or if the same mods would be needed:
1. The diameter of the flex pipe hiding power and burbles from us!
2. The stock exhaust valve spring (I know that the stock spring is usually very good but there is a tougher replacement out there for it, not sure if the face-lift would need it -hence the reason for raising post lol)/
3. Torque mount bushing. I know Whiteline do a very good job at making a supplement bushing that decreases wheel hop/cabin noise - is this still needed for the facelift?
 
Last edited:
I apologise in advance if these questions have already been asked/answered; I just wanted to ask if anyone knows if there were any improvements on these specific 'flaws' with the pre-facelift model or if the same mods would be needed:
1. The diameter of the flex pipe hiding power and burbles from us!
2. The stock exhaust valve spring (I know that the stock spring is usually very good but there is a tougher replacement out there for it, not sure if the face-lift would need it -hence the reason for raising post lol)/
3. Torque mount bushing. I know Whiteline do a very good job at making a supplement bushing that decreases wheel hop/cabin noise - is this still needed for the facelift?
should be a "no" (meaning no improvements) to all three IIRC.
 
  • Like
Reactions: FlappyPants321