Last edited:
-
Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i30 N, Ioniq 5 N, i20 N, Veloster N and Kona N forums! Check out the i30 N Bible Here!
- Custom Shift Knob & Alcantara
Shift Knob and Reverse lookout now completely hand made with alcantara shift bag
Last edited:
- Stage 1 Clutch kit
~600Nm by mttuning/Truckie aka Markus: Hope i find the time to get this beauty in 
Last edited:
- CANchecked MFD28:
Some weeks ago my CANchecked display arrived. Its easy to install but hard to configure, update or customize it. Had some problems to get the oil temp. data via OBD and when you tried to read the ECU memory for fault codes, the display froze. The developer fixed the issue and now it runs quiet good. Now there is one problem left, the OBD plug....the cover doesnt fit anymore when its plugged in.
I played a bit with the loading screen and made a "screensaver"
Last edited:
- Variable Boot Floor & Sub:
A couple of weeks ago, I installed my new Eton RES10A Sub. Quite good, but I own an EU re-import, so i good no variable boot floor and the "normal" carpet was laying directly on the sub. What now? .......upgrading to a variable boot floor version xD
After hours on the internet I found the items which I needed in Poland and a friend of mine helped me to get the parts to Germany.
The modification was a bit tricky, but after a few hours the result was perfect.
Before (Sry, no carpet)
After
Last edited:
D
Deleted member 2480
Guest
Do you have the hyundai part numbers to do the raised floor at all as it would be super helpful day to day
Floor: 85710-G4000
Trunk Sill Cover: 85771-G4500
Trunk Side Trim Panel L/H: 85730-Sxxxx
Trunk Side Trim Panel R/H: 85740-Sxxxx
There are different part numbers for the panels, but they will fit all (i had to mill a bit on the right side cause the radius of the wheelhouse was slightly different). Better you try to search on polish spare part sites and look at the pictures.
Trunk Sill Cover: 85771-G4500
Trunk Side Trim Panel L/H: 85730-Sxxxx
Trunk Side Trim Panel R/H: 85740-Sxxxx
There are different part numbers for the panels, but they will fit all (i had to mill a bit on the right side cause the radius of the wheelhouse was slightly different). Better you try to search on polish spare part sites and look at the pictures.
- Armrest:
Finally my moveable armrest from Poland arrived. Its used but in a very good condition. Actually, the part goes to the saddler anyway to have it covered with alcantara. The armrest is from a i30 premium model (84660-G4100)
- Airtec oil cooler
No temperature issues anymore. Built in upside down with custom thermal pellet (95°C - 110°C). Thank you @Bu11eT for the custom hose brackets.
Last edited:
- Armrest Part 2
Alcantara with blue stitches done Now i can shift while my arm stays on the Armrest
Now i can shift while my arm stays on the Armrest
- Little Crash
At the beginning of this seassion i had a little crash
One owner didn't think it was necessary to keep his dog on a leash. The poor little dog smashed at 50km/h into my frontbumper and the whole left edge of the front cracked (the dog didnt make it ).
).
Then the problems came............first the insurance didnt want to pay and after that, Hyundai had a waiting time of 4 month for a new bumper -.-
Since one week my little Gengar is finally back on the streets in his good old shape
Last edited:
Last edited:
- TurboZentrum Turbo Inlet/Airpipe & K&N Air Filter E-0642 [Inlet/Airpipe] [AirFilter]
New airpipe and inlet to prepare for upgrade turbo. Changed the air filter also , because the old pipercross one crumbles.
where did you bought that and does it fit plug and play?
- Armrest:
Finally my moveable armrest from Poland arrived. Its used but in a very good condition. Actually, the part goes to the saddler anyway to have it covered with alcantara. The armrest is from a i30 premium model (84660-G4100)
is there a part no so we might be able to get it from hyundai dealer?
It's pnp, no modification needed. You can buy it from hyundai, cost round about 300€ or you try to get a used one. I've got mine from, https://www.otomoto.pl/ for 30€.
Hello. I bought a sliding armrest with red threads. Don't know if it's possible to move just the top from the armrest I have?
- Armrest:
Finally my moveable armrest from Poland arrived. Its used but in a very good condition. Actually, the part goes to the saddler anyway to have it covered with alcantara. The armrest is from a i30 premium model (84660-G4100)
You need both parts, not only the top.The bottom part got the moveable mechanic.
84660-G4100