-
Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i30 N, Ioniq 5 N, i20 N, Veloster N and Kona N forums! Check out the i30 N Bible Here!
Dan_bush27 Performance blue thread
- Thread starter Dan_bush27
- Start date
Forge stainless steel braided brake lines ready to help the stopping power, after the upgrades are fitted.
I believe they are £129 from potn, I’m sure @1Burger2many (Adam Kelly) can sort you out with the forum discount too @Crocoman
Won’t be fitting myself. Saving for the wortech discs so will wait till then and have it all fitted at the same time
A few forge goodies, Ali oil cap and intake, I cannot stress as to how huge the filter is!!!! The sound is unreal, proper turbo flutter working alongside the forge BOV. Definitely more top end power. I just cannot wait for the intercooler to arrive, so I can get the downpipe fitted and it all dialed in on a Rolling road remap
What the =!&/$%
THIS THING IS DEFINETLY BIIIIIG! Well done! Would be glad to hear that beast in action! Any possibility to make a soundfile?
rrrrrrr tschhhhhhhhh rrrrrrrrr tschhhhhhhhhhhhhhhhI have a video from dashcam on my Instagram, the flutter is
Good Job. My feed wasn't updating, but definetly worth watching 
A dirty car, but got around to fitting the front carbon H badge
I have my car booked in for Thursday and Friday the 14th/15th of March for its custom remap along with sport cat down pipe, intake and intercooler. I’ll post all results here.
Hand on heart I have no idea what it’ll make, a number close to 350 bhp and somthing like 480nms would be a dream. I’m expecting reaslistically closer to a safe running 320 and 450 though, but will be interesting to see what can be achieved
Poly Bush arrived today which will be fitted the same time as DP and IC
Hand on heart I have no idea what it’ll make, a number close to 350 bhp and somthing like 480nms would be a dream. I’m expecting reaslistically closer to a safe running 320 and 450 though, but will be interesting to see what can be achieved
Poly Bush arrived today which will be fitted the same time as DP and IC
Have you seen the stage 2 figures Forge are quoting with their map? From memory it's around 340/460
Yea I saw that! Some great gains there! Not sure what’s needed for that their exact stage 2? I’m going for fully custom map on rolling road and road tested, taking 2 days to do it all
I had it dynod as totally standard at regal, it was in August, but same car same dyno (different day I know) will obviously have it dynod with all hardware but standard ecu and then a final power run with everything dialed in
Last edited:
Trying to get my hands on 1 of those air scoops that Tarmot has, maybe make my own lightweight one in carbon as I know how heavy the 3d stuff can be, directing straight to that intake filter, I imagine it’ll help no end. Another option is bonnet vents, I’ll try and use that as a very very last resort as I do not fancy cutting mine up
Make it from CF. 3D printed item is very light and there will be no trouble with weight but there is a troble with 3D printed items and heat. There is no difference are you using PLA, ABS or Nylon with heat items will expand and if there is nowhere to expand, they will start to bend. Even if you will make those items acetone bath, they will expand under heat. So make it from CF if you can.