It's an easy fix. It properly happened at the car wash. The workers don't pay any attention when washing. I'll still tell the vendor to consider using stronger adhesiveContact the vendor and tell him it wasn't up to spec and fell off. I'll bet he'll send you another one.
Ya as @R Veloster N already stated that to me is a warranty job take a picture send it into your service manager and say it just fell off while driving they will either ask you to come in for it to be replaced or they will ship you one out or even better collect it and fit it yourself, if you do end up fitting it yourself you will need to use a 3M Primer adhesive promoter as without using the 3M adhesive promoter it will only fall off again. So take all the residue glue off as it is firm plastic same shape as the N make sure you clean it back to the plastic then apply the 3m primer adhesive maybe give it two coats wait 10 minutes for it to dry and once you apply the new N symbol the VHB tape that will be on the back of the N emblem once that VHB tape makes contact with the 3m primer it will be nigh on impossible to remove without using considerable force so either whoever applied it did not use the proper procedure or maybe someone tried to pull it off and succeeded. You can actually see the remnants of the VHB tape in your photograph what was left behind. It would say it was taken off deliberately.
It's not the stock N badge that has an issue. It's a cover from ebay. Already told the vendor what happened.
Oh I see well your issue is you need to use 3m primer adhesive promoter when you stick the next one, then it will adhere properly and wont come off.
He sold 60 units in 60 minutes. One a minute!!gone in 60 seconds!!
You're welcome!gone in 60 seconds!!
@ R Veloster N => "Thanks for the tip"...
....got the last one!
