• Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i30 N, Ioniq 5 N, i20 N, Veloster N and Kona N forums! Check out the i30 N Bible Here!

velostern

  1. oohhjo

    Tuning SXTH Element ECU Calibration

    Hey what's up guys!! So I was looking for intercoolers to purchase and when I came across SXTHs website I noticed they added ECU Calibrations, or also basically a tuned ECU. You have the option to ship your own ECU in for a tune, you can buy a spare ECU to switch out for the OEM (I might do), or...
  2. N-Mode

    VN aftermarket parts compatible with i30n

    G'day all, Looking at purchasing multiple aftermarket items from different suppliers in the states (mainly SXTH Element). Would like to know if the Veloster N is the same build as the i30n in regards to the engine, intercooler, intake, exhaust etc. TYIA
  3. RPM8300

    SOUTH KOREA NCLUB KOREA TRACK DAY ON CIRCUIT

    HYUNDAI N CLUB KOREA TRACKDAY 2019.10.12 200 N VELOSTER Owners meeting
  4. RPM8300

    Tuning Veloster N Carbon Intake 89mm ( 3.5" ) with Cold airbox duct install

    NORCTUNE COLD AIRBOX fitt 100% oem intake air duct front i am make another under 76mm hole and using airhole by front driver bumper install using Ramair 90mm neck big carbon air filter it you can buy it ebay ramairfilter it is only 90$ this is better than ITG airfilter and...
  5. RPM8300

    Tuning VelosterN 480BHP 600.N.m Road test

    1.84bar dynojet 400whp 53kg. ( 520N.m ) > before upgrade stock 238whp 35kg ( 340N.m ) increase 162whp 180N.m it is almost engine power 480BHP 600N.m 1.6bar 380whp 49kg. ( 450BHP 480N.m ) gas : 93RON test Korea's gas stations are sold in two types of gasoline the...
  6. RPM8300

    Tuning Veloster N - Turbo upgrade Day 5 - manifold & clutch & wastegate valve

    xclutch made in Austrialia stage 1 organic disk spring type 600N.m included new lightweight flywheel this is not dual mass type this clutch kit is very lightweight ( 12.3kg ) than Genesis coupe oem clutch kit ( 23.4kg ) = almost 11.1kg Hyundai Genesis coupe 2.0 F/L oem clutch is...
  7. RPM8300

    Tuning VelosterN turbo upgrade Day3

    Turbo upgrade Day3 Today i install Big custom radiator & Redesign all intercooler line Tommrrow will make install exhaust manifold , turbo, weastegate Tial & Tial Bov I hope make success good plan
  8. RPM8300

    Tuning Veloster N World first turbo upgrade plan day1 ( from south korea )

    Today is the first day of the first turbo upgrade After lowering the engine first, it took about 10 minutes to replace the piston and conrod We have done a lot of engine work in Korea, so if you work with a professional mechanic, most of the work is completed in about 2 days except ecu remap...
  9. RPM8300

    Tuning superdrift big intercooler

    yesterday i install new big intercooler Superdrift 6020 tubed type intercooler is made in south korea it is good performance and non boost rack response is good this item price is almost 500$ ( included install all ) it take 3hour install time I am very...
  10. RPM8300

    Engine velosterN JB4 MAP6 dyno run test 304whp 472Nm

    yesterday i run test JB4 map6 custom data i was before change intake pipe is 287whp 445Nm i changed 80mm custom aluminium pipe it was 305whp 472Nm + Fuel wiress + changed HKS plug and regap 0.022 exhaust is all oem ( include downpipe ) oem intake + bmc map 0 data is 247whp...
  11. RPM8300

    Tuning Hyundai VelosterN Superdrift intake cold box install

    this intake cold airbox from south korea " superdrift " item The material is plastic and is the same as the material of the front bumper and is about 3mm thick It is effective because it does not get hot due to low thermal conductivity compared to general steel material You can choose between...
  12. RPM8300

    Engine Veloster N - ( I30N ECU ) JB4 dyno test result 299whp 481N.m

    HYUNDAI VELOSTER N 2019 JB4 CUSTOM MAP6 DYNOCOM TEST RESULT original (oem airfilter ) 236whp 353N.m BMC OTA airfilter + air hole airduct install 247whp 380N.M ( increase 11whp 27N.m) test by 2time each map map 0 : 261whp 420N.m ( BMC OTA increase ) map 1 : 275whp 470N.m...
  13. KoreaBroa

    Tuning Rollstopper Tuning

    Hi. I tuned the roll stopper to improve the gear shift feeling. It reduces power losses as well as feelings. However, there is also a disadvantage of getting worse vibrations when idling. I hope you think carefully and choose.
  14. RPM8300

    Engine JB4 install Veloster N world first ?

    today i install JB4 for my veloster N basic map1 setting pump gas fuel it is feelling very good and more performance & response... Korea, where I live, is very cold now. The jb4 was mounted and the driving test was carried out, but the road surface is cold and the wheel spin up to the third...
  15. RPM8300

    veloster N - turbo intake charge pipe spec

    veloter N 275ps engine oem reducer pipe width : 29~30mm in : 56~57mm outside : 63mm i will change my intake made it aluminium 90mm pipe + 63mm>90mm reducer silicone pipe and using Bmc ota air filter this is aftermarket intake pipe 76mm for open airfilter (...
  16. RPM8300

    Brakes Veloster N - aftermarket tuning front diskrotors

    same size of oem 345mm x 30t left : SJR diskrotors 7.337kg right : 4,600km run oem diskrotors 9.874kg lightweight : 5.07kg ( left & right ) another type disk
  17. RPM8300

    Brakes Brake air duct tuning (South Korea)

    HELLO i'm from south korea i have 2019 veloster n 275hp i tuning brake air duct more biggest thatn oem air duct it is more powerful decrease temperature when you driving and circuit racing i test normal oem than this duct system - 50C'~90C' it is good ( i test laser point )...
  18. RPM8300

    Hello friends, I'm from South Korea.

    hello friends~~ Hello I am a member of Korea who shipped my car in October. I am tuning the end of the veloster n model in Korea. I am planning to upgrade the Veloster n Turbo later. investing 4 hours a day in the knowledge of Velostar n and are working on parts. Currently, preparing for...