Wheels N-cars Rims Database

[mesai30n]

Does anyone know who manufacturers the I20 WRC wheels?

 

[Bu11eT]

Should be OZ

 

[Bretto]

Can anyone confirm if the Motec Ultralite 19x8.5 will fit a 2021 I30N? (currently on order).
I see them in the list here but have been reading 19x8 suit the car?

 

[Lawfulmoth]

Can anyone confirm if the Motec Ultralite 19x8.5 will fit a 2021 I30N? (currently on order).
I see them in the list here but have been reading 19x8 suit the car?

Hey mate, the wheels I just put on are the same size and offset as the ultralights(19x8.5 et45) and fit fine - pre facelift but there shouldn’t be a difference in fitment (someone correct me if I’m wrong).
That said they do fill the guards out more than standard, something to keep in mind if you’re planning on lowering etc. Also the 235/35/19 Pirelli’s don’t offer much rim protection, which I expected and plan to go a wider tyre when I need to replace. Feel free to DM

 

[Bretto]

Hey mate, the wheels I just put on are the same size and offset as the ultralights(19x8.5 et45) and fit fine - pre facelift but there shouldn’t be a difference in fitment (someone correct me if I’m wrong).
That said they do fill the guards out more than standard, something to keep in mind if you’re planning on lowering etc. Also the 235/35/19 Pirelli’s don’t offer much rim protection, which I expected and plan to go a wider tyre when I need to replace. Feel free to DM

Thanks for that info, have you lowered your car at all? I was wanting to drop it 15-20mm... This may be an issue.

 

[Lawfulmoth]

Thanks for that info, have you lowered your car at all? I was wanting to drop it 15-20mm... This may be an issue.

I haven’t yet but I’m planning on it, eyeballing it I think you’d be fine with 15-20mm, I can get some pictures of how they sit in the guards for you if you’d like

 

[Bretto]

I haven’t yet but I’m planning on it, eyeballing it I think you’d be fine with 15-20mm, I can get some pictures of how they sit in the guards for you if you’d like

That would be awesome, thanks mate

 

[Pavlosev]

With Motec 8.5x19 and 1.5cm lowered.
No issue at all!
The same will be with the FL model.

 

[Bretto]

With Motec 8.5x19 and 1.5cm lowered.
No issue at all!
The same will be with the FL model. View attachment 18424

That looks awesome. Thankyou

 

[Lawfulmoth]

With Motec 8.5x19 and 1.5cm lowered.
No issue at all!
The same will be with the FL model. View attachment 18424

That green looks fantastic

 

[Pavlosev]

That green looks fantastic

Neon yellow better!

 

[Bretto]

Neon yellow better!

I was going to say it looks yellow.

whats the saying, blue and green...

 

[Saabstyle96]

Hey Guys

Does Anybody know if Japan Racing JR 11
8.5x19 ET40 would fit with the original 235?

 

[Jns_i30N]

Hey Guys

Does Anybody know if Japan Racing JR 11
8.5x19 ET40 would fit with the original 235?

Somebody had them on the i30N, but i can´t find him anymore. He had these measurements i guess.

EDIT** Found it again:

View this content on Instagram

View this content on Instagram

 

[Takumi]

Fitted my N with Hyundai OEM 7.5J18 ET 49.5 Rims 52910-2W310, each rim weighs approximately 12.7kg.
Everything looks good except that on the rear the rim barely clears calipers.

 

[Gavkat09]

Anyone found 17’s to clear the brakes

 

[TomScharf]

Hi, I weighted the wheels I bought for summer
Dotz Interlagos 7,5x18 - 10,1 kg
Proline PXF 8x18 - 9,6 kg

 

[Deleted member 2480]

With Motec 8.5x19 and 1.5cm lowered.
No issue at all!
The same will be with the FL model. View attachment 18424

do you know the et and i assume stud pattern is 5 x 114.3

 

[djsinger]

do you know the et and i assume stud pattern is 5 x 114.3

Motec ultralight only comes with ET45 for i30

 

[digitalpeer]

anyone seen any other 18x9 +55's other than koya?