• Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i30 N, Ioniq 5 N, i20 N, Veloster N and Kona N forums! Check out the i30 N Bible Here!

Kamyk's i30N PB Performance Pack

Toggle sidebar Toggle sidebar
Today was my next bad day with car.
After cleaning I found this inside rear right doors....
1.jpg
2.jpg
Someone tried to close the doors with the belt buckle still outside the door.
I took off all belt covers with N logos (I left only mine in front of the wheel) because they were slowing the belt retracting.

I ordered this product to solve the problem for a while:
https://hyundaizubehoer.de/en/home/605-Lackstift.html
 
kamyk155 said:
First two parts from Hyundai zubehör from Germany.
Here is rear spoiler:
View attachment 7470View attachment 7471
View attachment 7472

Still waiting for last part from Ingo Noak - front spoiler carbon look.
Click to expand...

Hey Kamyk
I have ordered the rear wing and just wanted to know if you installed it or the dealership? If you installed it was there any difficulties to watch out for?

Hopefully I will get mine installed soon, however the screws and rubbers didn't come with the wing
 
Hello.
I mounted this rear wing in dealer service because I want to have full warranty for car and this hyundai product.
You should have with this spoiler 3 rubber washers and few screws with paper manual about mount (the same as on hyundai zybehoer site - pdf).
They had some problems with assembly - they told me that they needed two people for this because there was problem with drilling holes for screws with proper angles (no info in manual about this).
If you try to do this alone or with friend you can damage original spoiler (wrong hole places or angles).
After mounting some additional elements in the car in hyundai service I can easy add them to my car insurance - and I did it in this year.
 
kamyk155 said:
Hello.
I mounted this rear wing in dealer service because I want to have full warranty for car and this hyundai product.
You should have with this spoiler 3 rubber washers and few screws with paper manual about mount (the same as on hyundai zybehoer site - pdf).
They had some problems with assembly - they told me that they needed two people for this because there was problem with drilling holes for screws with proper angles (no info in manual about this).
If you try to do this alone or with friend you can damage original spoiler (wrong hole places or angles).
After mounting some additional elements in the car in hyundai service I can easy add them to my car insurance - and I did it in this year.
Click to expand...

Hi Kamyk
Thanks for letting me know. I will definitely let the dealership deal with the wing. Yeah those extra parts either didn't get sent or lost in shipping. Hopefully the Hyundai business in Germany will be fine with sending those across.
 
That 8 meter set is RGB and it can be connected to the other RGB interior roof set.
For now this blue led set is too bright for me and hurting my eyes.
Thats why I will order RGB one instead this blue set.
 
  • Like
Reactions: Bu11eT and iiNNEX
Yo listen up, here's the story
About a little guy that lives in a blue world
And all day and all night and everything he sees is just blue
Like him, inside and outside
Blue his house with a blue little window
And a blue Hyundai i30n
And everything is blue for him
And himself and everybody around
'Cause he ain't got nobody to listen
I'm blue da ba dee da ba daa
Da ba dee da ba daa, da ba dee da ba daa, da ba dee da ba daa.
 
  • Like
Reactions: RGP69, BDKEY, TarmoT and 3 others
Hahaha ..... but change this song to RGB :D

Car went to electrician for RGB fiber optic assembly and I ordered three RGB light bulbs for interior.
If I will have luck I will got the car tomorrow.
 
  • Like
Reactions: RGP69 and MarkMark
Today I recived three products form https://www.blauertacho4u.de.
I changed that roof blue lights to RGB and added those RGB fiber optics in all doors and around gear shift.
Last two things to do before I will some pictures - I need to change front panel fiber optic to new one because my electrican guy broke this one - jammed and broke this optic pipe and I need new one because light stops in that place and rest of the pipe is much darker.
After that I need to glue those fiber optics to the sides of the door to don't let them fall out.
Last thing is to change reverse lights to leds.
 
One of the last interior modifications made in this year.
Fiber optic RGB lights in the doors, front panel, around the gear shift and in the roof RGB leds.
1.jpg2.jpg3.jpg4.jpg5.jpg6.jpg7.jpg
As you can see of the pictures roof lights are on and off.
I have the footwell illumination in blue too that's why I set blue colour everywhere.
All buttons in the car are blue too after dark.
There are two modes of this lights - I connected them to the roof lights switch.
If the switch is in middle position - all lights are ON when I open the door.
When I close the door, get inside only roof lights goes off but after starting engine - all of them turn off. I can set every colour I want or it can be somekind of party mode (flashing or moving around rainbow).
Roof lights are RGB leds from the same company as optic fiber and they are connected to my smartphone to control their brightness and colour.
I can control them all together or separately - for example - optic fiber is one set and 3 lamps in the roof - three other sets - they all can have different colours.
 
Last edited:
  • Like
Reactions: lazygrangebay, gtchaa, Jbrow402 and 2 others
Some red...
1.jpg2.jpg
Funny thing is that my lets call them "persian carpets" on the doors are UV and looks nice with red colour.

My last interior modification is one of this -
https://www.ebay.de/itm/Carbon-Fabr...205144?hash=item262c6ea1d8:g:FKAAAOSwoMZcX3do
or:
https://www.ebay.de/itm/Black-Velve...274331?hash=item2614982c1b:g:O1EAAOSwEwNcbN65

I got them both inside my trunk ready for installation and I'm 80% sure for the full black velvet ones. Now my "persian carpets" are with red finish but I want to change them to full black.
They really good protected my doors from accidentally shoe kicking.
Why - because those carbon are almost the same carbon as on my car and people who put the carbon on it told me to not put them inside the doors - door plastics are rough and not fully flat.
 
  • Like
Reactions: gtchaa
Very nice!! Now you'll look like one of the "Blue Man Crew!"
badc5a3fb83ab9fb8533e02201f5724e.jpg
 
  • Like
Reactions: Talos, MarkMark, login and 1 other person
First thing I thought of seeing your interior:

tronbanner.jpg

As long as you like it, its all good :cool:
 
You must log in or register to reply here.

Top Bottom