-
Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i30 N, Ioniq 5 N, i20 N, Veloster N and Kona N forums! Check out the i30 N Bible Here!
Brakes Bigger brake kit?
- Thread starter YNWaN
- Start date
you will be happy when you see it on the car.Have you measured up for the wheels?Ha, again, that’s exactly what I’ve ordered, same size and ET! Can’t wait for them to arrive
. Not the cheapest option, but nice.
The brembos are pretty thick calipers like, iv ended up on a 18x8 et40 with my front wheels to get the caliper clearance
Attachments
Yea i did have a brief look at at them, well a few oz wheels actually, but just went with the bolas in a et40 on the front as they are miles cheaper and they are lighter. Plus i needed 2 sets for a set of track wheels also
Bola fle. No shims needed, et40 fit directly and give about 3-4mm to the caliper
Have you found some sort of kit or did you just found what fits? 'Cause i found your setup pretty interesting XD
I have the BBK by machined performance, I think I have the same caliper ( brembo megane 3 rs ) and I don't want a spacer, with Bola FLE 8X18 ET 40 you don't have any problem? Do you have some picture of rims please?
For your brake disc, where can I buy this model?
Attachments
Yea et40 on the bola fle 18x8 fit fine. To be honest i think alot of wheels in an et40 would fit.
My discs are from godspeed they are 355mm though not the standard size that the machined performance kit uses
Attachments
Somethings not right there. I run 18x8 et40 bola fle on the front of my car with brembo 4 pots and i have aprox 3mm clearance to the caliper. And they certainly dont stick out that far but i have abit of camber dialed in
Attachments
Last edited:
Hi there, yes my OZ are ET48 and with a 3mm spacer on the front they just clear the calipers. The tyres are pretty much flush with fenders though and the wheels, on their own fit inside the fenders.
