• Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i30 N, Ioniq 5 N, i20 N, Veloster N and Kona N forums! Check out the i30 N Bible Here!

Suspension and Chassis Ioniq 5 N Suspension upgrade

Toggle sidebar Toggle sidebar
Do have alignment specs for the I5N? What are the "after" alignment specs? How was camber affected?
 
ac/dc n 5 said:
FWIW, I just did 30mm springs, but after lowering I still had 2.5 degrees negative camber with the factory control arm adjustment maxed out.
Click to expand...
That's not too bad...I've heard of others that installed the Neotech springs and couldn't reduce past 3.0 degrees camber!

The factory specs have a maximum allowable camber of 2.0 degrees (-1.5 +/- 0.5) front and rear...

I5N Alignment Specs.jpg
 
I do not have a link, but if you google Hardrace susprension Austraila you should be able to find them. The arms were on backorder for a couple monts when I ordered but I don't know now.
 
That is them. I, as well as the alignment shop, thinh they are very well made and not too crazy expensive. I don't know if you are aware, but Neotech has recently released a set of adjustable lower control arms for camber alignment problems and they are nice looking CNC'ed aluminum pieces but are likw $2,800 bucks or something.
 
Hardrace makes the rear camber kit also:

hardraceusa.com

Hardrace Rear Camber Kit (Pillow Ball) for Hyundai Elantra 6th 2016-2020 | i-30 3rd 2016- | SONATA 7th LF 2014-2020 | IONIQ 2017- | Veloster 2nd '18- | Kia OPTIMA / K5 JF 2015-2020 | Kia K7 2017-

Part number: Q1005Note: Pillow Ball Equipped *For Multi-link rear axle *Including I30 N/Veloster N 2 PCS/SETDescription The camber kit allows fine adjustments to the rear end camber setting of the vehicle. It can either help maximize wheel contact patch to improve cornering grip or get your car...
hardraceusa.com hardraceusa.com
 
EricB said:
Hardrace makes the rear camber kit also:

hardraceusa.com

Hardrace Rear Camber Kit (Pillow Ball) for Hyundai Elantra 6th 2016-2020 | i-30 3rd 2016- | SONATA 7th LF 2014-2020 | IONIQ 2017- | Veloster 2nd '18- | Kia OPTIMA / K5 JF 2015-2020 | Kia K7 2017-

Part number: Q1005Note: Pillow Ball Equipped *For Multi-link rear axle *Including I30 N/Veloster N 2 PCS/SETDescription The camber kit allows fine adjustments to the rear end camber setting of the vehicle. It can either help maximize wheel contact patch to improve cornering grip or get your car...
hardraceusa.com hardraceusa.com
Click to expand...
Unfortunately, they're just not available or in stock!
 
It has been a little while now, but I think only the front could not be brought into spec, I believe the rear was handled with alignment cam bolts, but don't quote me. I had to wait about two months for mine to arrive, seems like many owners are having a similar problem if they keep running out of stock.
 
They do look quite a bit like the arms from Hardrace,,,,,,don't they? Also going to be cheaper shipping that coming from NSW. One thing I saw if I looked at thier site correctly is the price is for a single arm. I believe you need to put a pair in your cart, but you could ask them to be sure.
 
You must log in or register to reply here.

Top Bottom