Still looking to get the European car wiring confirmed so that we know it can be easily fitted.
I have 1 kit that's ready (had a cancelled order), any takers?
I have 1 kit that's ready (had a cancelled order), any takers?
-
Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i30 N, Ioniq 5 N, i20 N, Veloster N and Kona N forums! Check out the i30 N Bible Here!
Deactivate Start&Stop (ISG)
- Thread starter asd
- Start date
-
- Tags
- start/stop
Now taken. That was the last of the first few PCB's, I have some more on order already, so more modules available soon.
Yes it the same, if you keep the clutch in it will stay on it just bad habit and not great for wear
Thanks for that, I know it can be a wear issue theoretically, but I was taught to drive that way and always have, 32 years later and I've never had any issues, just glad the way I drive the stop/start system won't annoy!
upon reflection im taking about a car that come with launch control so keep the clutch in at he lights is a mute point lol
I think i found a way to deactivate start stop feature by accident 
https://n-cars.net/forums/threads/auto-wipers-interior-lights-and-start-stop-isnt-working.1825/
https://n-cars.net/forums/threads/auto-wipers-interior-lights-and-start-stop-isnt-working.1825/
And half of the car's interior functionalityI think i found a way to deactivate start stop feature by accident
Not, half.. just interior lights and auto wipersAnd half of the car's interior functionality
But it's still driveable. So use a few candles for interior lighting and coat your Windows.
As I understand it only affects the auto wipers rain sensor, the other modes work? So maybe just use a headlampBut it's still driveable. So use a few candles for interior lighting and coat your Windows.
Hi, I'm still looking for a European owner to identify the wiring colours on your cars (I've had it confirmed they are different to the UK cars), so that the installation instructions can be confirmed for you. Special price on a module if you can help!!
The signals that need to be identified are:
car wiring (UK)
BROWN........................+12v permanent feed
PINK................................ignition feed, +9v when on, 0v when off
YELLOW/GREEN........ISG button; 5v when released, 0v when pressed
BROWN/YELLOW......ISG button status LED: 12v when off, 0v when on
BLACK.............................GROUND
The signals that need to be identified are:
car wiring (UK)
BROWN........................+12v permanent feed
PINK................................ignition feed, +9v when on, 0v when off
YELLOW/GREEN........ISG button; 5v when released, 0v when pressed
BROWN/YELLOW......ISG button status LED: 12v when off, 0v when on
BLACK.............................GROUND
Thanks Buz, I've currently got someone lined up to have a look at the end of the week, will hopefully report back with good news!
Tried this: https://www.ebay.com/itm/NEW-Start-...RVICE-MODE-Start-Stop-SSA-memory/322352078637
But it seems that after module is connected, voltage will drop from 9V to 6V and module wont work
But it seems that after module is connected, voltage will drop from 9V to 6V and module wont work
M
Member left member 268
Guest
M
Member left member 268
Guest
Hi, I've replied to you seperately.
You won't be able to power the module from the +9v ignition feed at the switch connector, as it has insufficient current capability. I've included some circuitry in my module that uses this signal to switch a proper power feed, it also reads the current status from the switch LED so that it can always reproduce the previous state it on startup.
Last edited: