I’m very interested in getting this I take pipe/adapter, do you know what other aftermarket intakes work with it apart from ITG thanks!TurboZentrum turbo intake pipe/adapter finally arrived
Fits perfect, very pleased.
View attachment 16978
-
Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i30 N, Ioniq 5 N, i20 N, Veloster N and Kona N forums! Check out the i30 N Bible Here!
What did you do to your N today ?
- Thread starter Y0UKN0WITSCHRIS
- Start date
Couldn't tell you exactly but any intake that would replace the standard airbox but could still utilise the OEM intake pipe would work.
The Turbozentrum is designed to fit the standard airbox and the ITG is designed to fit the standard intake pipe. Perfect marriage!
Was it difficult replacing the turbo inlet adaptor with the included turbozentrum one?TurboZentrum turbo intake pipe/adapter finally arrived
Fits perfect, very pleased.
View attachment 16978
Is airflow better or worse than stock airbox - isn't it facing away from the stock air duct?
Would airflow be better with say, a velossa big mouth (or an excuse to get one hehe) or would it be useless because of where the ITG sucks air from?
I heard that semi-closed filters make the artificial 'sututu' noise more audible, is this true with this setup!?
And lastly (sorry) did you just rotate the filter and put an N sticker on it? If so, I may have to 'borrow' that idea if I can't buy it like that, love it!
Was it difficult replacing the turbo inlet adaptor with the included turbozentrum one?
Not really, all turbo inlet adapters fit the same. Its fiddly but with the correct tools not bad.
There is a little cheat (just the order you do the screws basically) when fitting these which makes it easier. The good thing about the turbozentrum one is that is doesn't re-use the OEM metal gasket, makes things way simpler.
Is airflow better or worse than stock airbox - isn't it facing away from the stock air duct?
Dunno, a couple of us have the ITG fitted and we both think the car pulls harder. The ITG inlet is at the headlight area and it must get its air from somewhere lol.
Would airflow be better with say, a velossa big mouth (or an excuse to get one hehe) or would it be useless because of where the ITG sucks air from?
Not really but I do have one installed anyway as I had fitted previously when I ran the stock airbox. It certainly can't hurt but I wouldn't buy one purposely for an ITG Maxogen.
I heard that semi-closed filters make the artificial 'sututu' noise more audible, is this true with this setup!?
Its certainly audible, think Darth Vader with a chest infection!
And lastly (sorry) did you just rotate the filter and put an N sticker on it? If so, I may have to 'borrow' that idea if I can't buy it like that, love it!
My ITG was purchased used and the ITG sticker was half missing. Ripped it all off and stuck an N sticker on that I had laying around. Its copyrighted and you must pay me a fantastic amount of money to copy it. Thanks,
Here you go @FlappyPants321 see answers in quoted text above.....
Its £5 per question so thats £25 you owe me!
Wiring the money now, though with exchange rates atm I may have to just say a very big... thank you!!!! How did you know I always wanted the sound of an asthmatic evil villain coming from my engine! Thank you for the advice, prompt and thorough responseHere you go @FlappyPants321 see answers in quoted text above.....
Its £5 per question so thats £25 you owe me!
Finished swapping the front seats from the boring Standard N seats to these beautiful Korea Spec N Light Sport bucket seats!
Its exactly what I expected after chatting with other VN owners in South Korea. Airbag is plug and play, seat rails and position are the same. Only thing that needed to be done was wiring the N lights to function. Should post a separate thread with regards to the seats in the future.
First clean after having installed the rear diffuser mod, Resonated GPF delete, and Powerflex bushing a few days ago!
Gave the N a wash today. The carwash had leftover foam colouring from Easter……
*it’s pH neutral foam
*it’s pH neutral foam
I'm now waiting for my i30n dct and I would love to have that red line on the sides aswell. How do you put it? Is it a totally new skirt or just a red line applied?
The diffuser looks sick
I'm now waiting for my i30n dct and I would love to have that red line on the sides aswell. How do you put it? Is it a totally new skirt or just a red line applied?
The diffuser looks sick
Thanks!
The red stripe is just a vinyl stripe I got off of ebay:
Fits Hyundai i30N i30 N Performance Sill Stripe sticker decal 10Year Cast Vinyl | eBay
Find many great new & used options and get the best deals for Fits Hyundai i30N i30 N Performance Sill Stripe sticker decal 10Year Cast Vinyl at the best online prices at eBay! Free shipping for many products!
www.ebay.com
It's been on for about 3 months now.
I had a Pandora Storm fitted, which you don't really know is there, and got my stock wheels refurbished..
Installed the Boomba Racing short shift lever and a customized BilletWorkz short tear drop gear knob with the Hyundai N logo engraved. 
Awesome! You made a few pics of the install by any chance?
Of course! Given that no one has yet to show the install in detail. Here are a few pics.
A couple of important things to note when doing this install:
- You’ll need to reuse the lockout spring for the new reverse lockout ring that Boomba racing provides as they do not include the spring.
- This install requires the removal of the entire reverse lockout assembly thats from your existing gear boot in order to fit the reverse lockout made by Boomba Racing.
- When you combine the short shift lever with the short shift adapter plate made by Boomba. The shift movement will be reduced by over 50%. Since I have both installed, most of the shifting issues have been absent.
- As shown in one of the pictures, a Dremel is required to cut off the clip that holds on the pin in place. However, Boomba provides you a new one after you installed the shift lever so take your time when cutting. I managed to pry the original clip as far from the plastic base as much as possible in order for the Dremel tool to only cut the clip and nothing else.
Attachments
-
7646FBD8-7B3E-4688-86B1-9A58EC75C2E5.jpeg -
9BAA4BFC-8B6B-4A16-A817-C7D31458435C.jpeg -
12B61C4A-32B8-471F-9424-2700A1676727.jpeg -
E60D07EB-916A-4818-8F16-34BB087FA731.jpeg -
17C10E55-989A-4A60-A536-7C670DF7389D.jpeg -
DA7771B2-6BF6-46E0-8C9C-B218ACF3F26E.jpeg -
5E579A3F-506D-47C3-A0B6-958E95C9DBC9.jpeg -
5B33A00A-C44B-4BF2-B02D-BF05D9C162E1.jpeg -
6AD0D118-F20D-4A15-BA61-309C316791D2.jpeg -
A8BDF01C-68BC-4984-A422-B15330CB8BDE.jpeg
Guys I have a question for those who have experience with Gruppenzwang. I have ordered the exhaust tips for my i30n on their website. How long have you been waiting to receive them? I have ordered and payed already in the middle of January (half a year ago). Since then I have not received the product and also I am not able to get in touch with Gruppenzwang. No replies on emails or telephone calls. Weird... 