• Welcome to N-cars.net - the largest Hyundai N car forum. Check out the model specific sections below and scroll down for country specific forums. Scroll down for i20 N, Kona N and Tuscon N forums! Check out the i30 N Bible Here!

Engine velosterN JB4 MAP6 dyno run test 304whp 472Nm

RPM8300

Well-Known Member
Dec 11, 2018
127
284
63
SOUTH KOREA
yesterday i run test JB4 map6 custom data

i was before change intake pipe is 287whp 445Nm


i changed 80mm custom aluminium pipe it was 305whp 472Nm + Fuel wiress + changed HKS plug and regap 0.022



exhaust is all oem ( include downpipe )


oem intake + bmc map 0 data is 247whp

map 1 265whp , map2 275whp, map3 275whp, map6 304whp벨로스터n48너2444.png
 

Attachments

  • externalFile.jpg
    externalFile.jpg
    77.4 KB · Views: 68
  • KakaoTalk_20190403_094829644_14.jpg
    KakaoTalk_20190403_094829644_14.jpg
    90.3 KB · Views: 64
  • 20190405_181141.jpg
    20190405_181141.jpg
    71.8 KB · Views: 63
  • 20190405_181128.jpg
    20190405_181128.jpg
    92.2 KB · Views: 67
  • 20190404_084203.jpg
    20190404_084203.jpg
    87.4 KB · Views: 75
Last edited:
Good job ;) Is it a matter of dyno print but I have never seen so smooth torque curve on N-cars with oem turbocharger. We can not estimate how much bhp that car makes because another type of dyno was used for measurements.
But there is a very good thing what gives good compairson about real power of that car without arguing about bhp vs. whp - it is a 100-200km/h (62-124mph) run starting on 3-rd gear.
 
Good job ;) Is it a matter of dyno print but I have never seen so smooth torque curve on N-cars with oem turbocharger. We can not estimate how much bhp that car makes because another type of dyno was used for measurements.
But there is a very good thing what gives good compairson about real power of that car without arguing about bhp vs. whp - it is a 100-200km/h (62-124mph) run starting on 3-rd gear.


You mean is this dynocom ? Not dynojet mean ?
I think it is dynojet almost 285~290whp i think

I will check 100~200km check and i will again post
 
Last edited:
  • Like
Reactions: Maggei82 and TarmoT
16sec is not standard even from 100-200km/h, standard is between 17,4 and 18,... sec.
Why you made 60-200km/h run? Please make a run like I wrote: from 100 to 200km/h and staring by 3-rd gear.
To have a compaison, mesurements should be done on same way or there will be nothing to compaire.
 
  • Like
Reactions: RPM8300 and KevI30N
Hmm, that's a good point. I'm going to do a 100-200 run later and see how mine stacks up with the same JB4 map. Will likely have to wait until tomorrow though as it's been raining non-stop here for the past 4 days, should be drying up tomorrow though.
 
16sec is not standard even from 100-200km/h, standard is between 17,4 and 18,... sec.
Why you made 60-200km/h run? Please make a run like I wrote: from 100 to 200km/h and staring by 3-rd gear.
To have a compaison, mesurements should be done on same way or there will be nothing to compaire.


ok i will retest 100~200km everybody sait chek 60~200 so i test them 2rd gear start

next it will check 3rd gear 100~200km ok ?
 
There’s plenty of 100-200kph in the 16second range.

It’s not an official quoted measurement by Hyundai (such as 0-62kph) so I’m not understanding why some people on here are defiantly stating that it’s ‘not possible’.

Maybe you need to do some work on your gear changes.....;)
 
Please can you add here some examples from those 16-sec runs?
As much I have found from Youtube so far, all measurements with measurement tools are between 17 and 18 sec.
 
Please can you add here some examples from those 16-sec runs?
As much I have found from Youtube so far, all measurements with measurement tools are between 17 and 18 sec.


You mean 60km~200km oem data is 17~18sec ?

Now i am going to 2weeks later turbo upgrade Garette Gtx2867R Gen2 hahaha please hope good luck dynorunShare_0.png